84428-5 | Centro-Matic SL-42 Series Oil Injector Assembly
$245.56
- For single-line central lubrication system.
- For dispensing fluid or semi-fluid lubricants.
- Output is externally adjustable.
- Indicator stem permits visual check of injector operation.
- May be combined in a circuit of injectors SL-43, SL-41 and/or SL-44.
- Individual injectors can be easily removed for inspection or replacement.
- Carbon steel injectors with Nitrile or flouroelastomer packings.
- Injectors with flouroelastomer packings are used for heat resistant applications or when lubricant to be dispensed requires flouroelastomer packings for compatibility (indicated by black adjustment caps).
| Output Min./Max. | 0.001 cu. in. / 0.016 cu. in. |
| Operating Pressure Min./Max. | 750 psig / 1000 psig |
| Operating Pressure - Typical | 850 psig |
| Operating Pressure - Vent | 150 psig |
| Manifold Inlet Connection | 1/8" NPTF (F) |
| Injector Outlet Connection | 1/8"O.D. tube connection |
| Model | Number of Outlets | A Dimension | B Dimension |
| Heat Resistant | 5 | 4 1/8" | 4 5/8" |
Notes:
- Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing – 1/8" O.D. as standard. Other outlet connectors for feed line optional.
- Injectors with manifolds include two mounting clips and screws.
- Standard injectors have Nitrile packings (200°F/93°C max.); Heat Resistant injectors have flouroelastomer packings (350°F/176°C max., depending on lubricant used) and black adjusting cap. Check packing compatibility with synthetic lubricants.Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with two turns at .001 cu. in./turn.
Note: Product images are for representation only.